New Sabrecraft Marine WB5900 Work Boat Punt and Trailer and Motor!

Price AU $39,700 Plus GST if applicable

Price
AU $39,700 Plus GST if applicable
Details
Sabrecraft Marine WB5900 Work Boat Punt - CE Approved and Trailer and Motor!!

Price Shown is for boat only, please see below for details

WB5900 - Ex yard Brisbane
o Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
o Length OA: 5.90 meters
o Width OA: 2.30 meters
o Height OA: 0.75 meters
o Forward section fitted with bump fender
o Additional side fenders - Extra as below
o Floor is double plate fully welded with 100x50 RHS cross bracing
o 120lt aluminium fuel tank fitted into transom behind seat
o Lifting lugs fitted
o Forward bow storage
o Twin Batteries with high amperage isolator switch
o 2 x 2000 GPH Bilge Pumps
o Standard Navigation Lights
o Floor is aluminium plate coated with non-slip rubber membrane
o AMSA Form 579 2E - CE approved 2D
Price: $39,700 + GST

Additions - Includes fitting
1. $1,480 - Side fenders top and bottom - Timber (already fitted)
2. $980 - Console (already fitted)
3. $780 - Cable Steering + Wheel (already fitted)
4. $970 - Antifoul (already fitted)
5. $2,450 - Engine Guard (already fitted)
Price: $6,660 + GST

Engine/s (includes Fitting, wiring harness and Prop)
o 1 x Mercury 60hp 4 Stroke Seapro
Price: $12,800 + GST

Trailer WBT5900 Tandem Built to AS4177.3-2003-ADR-VSB1-Rev 6
o Rating: 2,700kg ATM
o Frame: Hot dipped galvanised C Section
o Coupling: 50mm Hydraulic with Breakaway System
o Axles: 2 x HDG - 2000kg rating each
o Suspension: Torsion Bar
o Brakes: Kodiac Disc both axles
o Wheels: Hot dipped galvanised
o Tyres: 14" 185R trailer rated
Price: $14,850 + GST no rego

Summary
$39,700 - WB5900
$6,660 - Additions
$12,800 - Motor
$14,850 - Trailer
$74,010 - Sub Total
$7,401 - GST
$81,411 - Total including GST

Notes
1. Package price is based on Blue WB5900 in stock Brisbane
2. Price shown is the ex-yard Brisbane, ready for pick up by the buyer
3. If not shown GST must be added
4. These boats are CE approved and you can use the AMSA 579 self-assessment scheme to register the vessel for commercial use 2E
5. Trailer Registration - The trailer will need to be registered at the expense of the client
6. Price validity - 14 days
7. Payment Terms - Full payment prior to collection
10. To allow for the AMSA registration of the vessel (commence whilst it is in transit) Sabrecraft will provide all relevant details for the registration process prior to shipping i. E. After the boat is built but before it is shipped


The most popular work boat in our range, available is now available in 3 sizes, WB5900, WB7400 and now the extra wide WB7400-3 (3.00 meters wide). These are the best built work punts on the market, as well as the best priced in Australia today

We have this vessel available in Brisbane ready to go

They are not plank boats, these are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.22 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate

In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve

The rear area behind the seat is now recessed 50mm to allow for any water, fuel spills to concentrate within the bunded area for removal by the built in bilge pumps or if fuel spills or by hand

The paint is Marine Grade PU inside is White and the outside colour blue

These are standard Production Boats with stock normally always ready in the factory Malaysia, on the water or in Australian holding yard Brisbane

Certification
These boats are plan approved to AMSA Domestic Commercial Vessel
Sabrecraft Marine is also the first company to have available in Australia "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form 579 with AMSA as 2E, no survey inspection required, less headaches with inspections and costly Surveyors fees

Aluminium Boating Specialists!
Sabrecraft Marine is truly a one stop shop for all your vessel design, certification and manufacturing needs. With our inhouse naval architects, AMSA approved surveyor, CE certified products and precision CNC, contact us today to discuss your next boating adventure!!
Region
Queensland
Location
Brisbane QLD
Year
2022
Length
19' 4" - 5.90m
Hull Material
Aluminium

Contact us for more information