New Sabrecraft Marine WB7400 Work Boat Punt

Price AU $44,850 Plus GST if applicable

AU $44,850 Plus GST if applicable
The most popular work boat in our range, available is now available in 3 sizes, WB5900, WB7400 and now the extra wide WB7400-3 (3.00 meters wide). These are the best built work punts on the market, as well as the best priced in Australia today

We have this vessel available ready to shipout

They are not plank boats, these are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.22 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate

In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve

The rear area behind the seat is now recessed 50mm to allow for any water, fuel spills to concentrate within the bunded area for removal by the built in bilge pumps or if fuel spills or by hand

The paint is Marine Grade PU inside is White and the outside colour is your choice

These are standard Production Boats with stock normally always ready in the factory Malaysia, on the water or in Australian holding yard Brisbane

These boats are plan approved to AMSA Domestic Commercial Vessel
Sabrecraft Marine is also the first company to have available in Australia "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form 579 with AMSA as 2E, no survey inspection required, less headaches with inspections and costly Surveyors fees

Specifications WB5900
Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length OA: 5.90 meters
Width OA: 2.30 meters
Height OA: 0.75 meters
Forward section fitted with bump fender
Gunwale Tie Down Rail: Full length
Deck Toe Hold: Full Length
Floor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
120lt aluminium fuel tank fitted into transom behind seat
Lifting lugs fitted x 4
Forward bow storage
Navigation Lights: Forward + All round light at stern
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: CE Approval Module B Category D
Approval 2: AMSA - Domestic Commercial Vessel 2E
Motor: Maximum 200hp (not included)
Colour -TBA Client's choice, single colour
Batteries: Twin with high amperage isolator switch
Bilge Pumps: 2 x 2000 GPH
Warranty: Structural 5 years - Fittings 12 Months

Additional Fittings
Side Fenders - Top Full Length: $780.00
Side Fenders - Top Bottom Full Length: $780.00
Side Seating - Both sides: $2,450.00
Enclosed Sides: $2,670.00
Side Console: $980.00
Cable Steering + Wheel: $780.00
Heavy Duty Hydraulic Steering + Wheel: $1,880.00
High pressure deck wash and hose: $380.00
Gunwale Grab Rail - Both sides: $1,870.00
Motor Guard - $2,450.00
Canopy 1.50 x 2.30: $1,850.00
Canopy 3.00 x 2.30: $2,270.00
Canopy 4.00 x 2.30: $2,560.00
Canopy 5.00 x 2.30: $2,750.00
Canopy 6.00 x 2.30: $2,980.00
Ant-foul Hull and Sides 300mm - $970.00

Engines - Ask about Pricing
We stock Yamaha, Suzuki and Mercury

Trailers TWB5900 or TWB7400
Rating: 2,700kg
Frame: Hot dipped galvanised
Coupling: Demco 6600 with brakeaway system + electric reverse solinoid
Axles: 2 x 75mm Square HDG/Dacromet
Suspension: Torsion
Brakes: Hydraulic Discs on all wheels - with Dacromet finish
Wheels: 14" Hot dipped galvanised
Tyres: 14" 165R75
Price: $13,850 no rego
Ex Yrad Brisbane or Ex Yard Malaysia
24' 3" - 7.40m
Hull Material
Aluminium Marine Grade 5083-H116

Contact us for more information