New Sabrecraft Marine WBC7400 Catamaran Workboat Work Boat Punt

Price AU $63,600

AU $63,600
Description: Sabrecraft Marine WBC7400 Catamaran Work Boat Punt Overview

A new work boat in our range, available is now available in 3 sizes, WBC5900, WBC7400 and now the extra wide WBC7400-3 (3.00 meters wide). These are the best built Catamarn work punts on the market, as well as the best priced in Australia today

They are not plank boats, these are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.20 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate

In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve

The deck is self draining with 8 x scuppers fitted, 2 at the rear and 3 down each side

The paint is Marine Grade PU inside is White and the outside colour is your choice

These are Production Boats with stock normally always ready in the factory, on the water or in Australian holding yard Brisbane

These boats are plan approved to AMSA Domestic Commercial Vessel
Sabrecraft Marine is also the first company to have available in Australia "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form 579 with AMSA as 2E, no survey inspection required, less headaches with inspections and costly Surveyors fees

Specifications WBC7400
Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length OA: 7.40 meters
Width OA: 2.30 meters
Height OA: 1.20 meters
Forward section fitted with bump fender
Gunwale Tie Down Rail: Full length
Deck Toe Hold: Full Length
Floor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
120lt aluminium fuel tank fitted into transom behind seat
Lifting lugs fitted x 4
Forward bow storage with hatches
Navigation Lights: Forward
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: AMSA - Domestic Commercial Vessel
Approval 2: CE Module B Category D
Motor: Maximum 200hp (not included)
Colour -TBA Client's choice, single colour
Batteries: Twin with high amperage isolator switch
Warranty: Structural 5 years - Fittings 12 Months

Additional Fittings
Side Fenders - Top Full Length: $740.00
Side Fenders - Bottom Full Length: $740.00
Side Seating - Both Sides: $1,950.00
Enclosed Sides: $2,670.00 (Extra Load Carrying Capacity)
Side Console: $980.00
Cable Steering + Wheel: $780.00
Heavy Duty Hydraulic Steering + Wheel: $1,880.00
Stainless Steel Tie Bar: $550.00 (for twin motor installation)
High pressure deck wash and hose: $380.00
Gunwale Grab Rail - Both sides: $1,270.00
Motor Guard with D Fender - $2,450.00
Ant-foul Hull and Sides 300mm - $880.00
Canopy 1.50 x 2.30: $850.00
Canopy 3.00 x 2.30: $1,270.00
Canopy 4.00 x 2.30: $1,560.00
Canopy 5.00 x 2.30: $1,750.00
Canopy 6.00 x 2.30: $1,980.00

Engines - Ask about Pricing
We stock Yamaha, Suzuki and Mercury

Trailers TWB5900 or TWB7400
Rating: 2,000kg
Frame: Hot dipped galvanised
Coupling: 50mm Ball AS4177.3 with handbrake
Axles: 2 x 75mm Square HDG
Suspension: Torsion
Brakes: Disc on front axle with Dacromet finish
Wheels: Hot dipped galvanised
Tyres: 14" 165R75
Price: $13,850 no rego
Hollywell QLD
24' 3" - 7.40m
Hull Material
Aluminium Marine Grade 5083 H116

Contact us for more information